Workshop manual. English. XP. For Husqvarna Parts Call or Workshop manual. 90 , , XP, For Husqvarna Parts Call or XP, XPG, Xp E-tech, XPG E-tech, , G, E-tech, G E- tech, TrioBrake. Please read the operator’s manual carefully and make sure.
|Published (Last):||25 October 2017|
|PDF File Size:||19.84 Mb|
|ePub File Size:||19.26 Mb|
|Price:||Free* [*Free Regsitration Required]|
H Bar Check regularly: Daily Maintenance Below you will find some general maintenance instructions. Don’t show me this message again.
Documentation – Operators and Illustrated Parts Manual 346 or 346XP series Chainsaw
Never carry or hang the saw by the trigger. Page 5 1 Chain brake and front hand guard YOUR chain saw is equipped with a chain brake that is desig- ned to stop the chain immediately if you get a kickback. Page 12 2 Sharpening your chain and adjusting raker clearance The risk of kickback is increased with a badly sharpened chain! The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes.
Always wear safety goggles for eye protection. Chainsaw Husqvarna Operator’s Manual Husqvarna chainsaw operator’s manual 44 pages. When you buy any of our products we majual the availability of professional repairs and service. Kickback is usually quite mild, but it can sometimes be very sudden and violent.
Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice. Table Of Contents Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust hussqvarna sawdust can represent a health risk.
Husqvarna 346XP E-tech User Manual
Don’t have an account? By being prepared you reduce the risk.
Spark plug The spark plug condition is influenced by: Wipe off the spill and allow remaining fuel to evaporate. Take off the bar nuts and remove the clutch cover. Husqqvarna must use approved personal protective equipment whenever you use the machine.
The saw is supplied from the factory with the screw set to position 2. Mounting guide bar and chain Always husqvatna gloves, when working with the chain, in order to protect your hands from injury. Tree Felling Technique 2 The log is supported at one end. Before moving your chain saw switch off the engine and lock the chain using the chain brake.
346zp do this it is best to work from the top down and keep the trunk between you and the chain saw. A blocked mesh will cause the engine to overheat and may lead to serious Check that the throttle control and throttle lock move freely and that the return springs work Press the throttle lock and make sure it returns to its original position when you release it.
A damaged manua filter must always be replaced.
Husqvarna FAQ : Documentation – Operators and Illustrated Parts Manual or XP series Chainsaw
Throttle Lock 2 Throttle lock Make sure the throttle control is locked at the idle setting when you release the throttle lock. If you get a violent kickback while the kickback zone of the bar is farthest away from you Table of Contents Add to my manuals Add. Check that the chain brake is in disengaged position by moving the front hand guard towards the front handle. Please read these instructions carefully and make sure. A Husqvarna chain saw can be equipped with different types of airfilter according to working and weather conditions, season etc.
When the chain is blunt you have to exert more pressure to force the bar through the wood and the cuttings will be very small. Adjustments are made by turning the screw using a screwdriver or combination spanner. To maintain cutting performance you must file back the raker teeth to the recommended height. Carry the saw with the bar and chain pointing backwards. Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.
If you have more questions, contact your servicing dealer.